Alpha Technologies FXM2000 Specifications download pdf (Page 42)

017-230-B0 Rev 0810

6.9.10 100-Event Log

Up to 100 events are stored in the Alpha FXM’s log. If more than 100 events occur, the oldest is over-written.

Procedure

1. To see the log, type event (all lower case) and press Enter. The events are listed starting with the most

recent and appear as: If less than 100 events occurred, the last entry will appear as:

See below for details on these

readouts.

eventX=12/25/99 01:45:59 0000000000000000, 0000000000000000, 000

Event Date Time Alarm Fault Mode

Date & Time formats depend

on selected display format

Alarm: When the following bits show a 1,

the following alarms are displayed.

Self Test

Fault: When the following bits show a 1,

the following faults are displayed..

Table O — Event Codes

Code Mode Code Mode Code Mode

000 Standby 003 Boost 1 006 Inverter

001 Line 004 Buck 1 009 Shutdown

002 Boost 2 005 Buck 2 010 Bypass

2. If less than 100 events occurred, the last entry will appear as:

3. To clear the log, type eventclr and press Enter. It takes the Alpha FXM 30 seconds to clear the log. Do not

enter any other commands during this time.

4. To see a speciﬁc event, type eventX where X is from 1 to 100 and press Enter. To see a range of events (for

example, events 20 to 30), type eventX-X where X are events from 1 to 100 and press Enter. To clear the

log, type eventclr and press Ente r. It takes the Alpha FXM 30 seconds to clear the log. Do not enter any

other commands during this time.

5. To see a speciﬁc event, type eventX where X is from 1 to 100 and press Enter. To see a range of events (for

example, events 20 to 30), type eventX-X where X are events from 1 to 100 and press Enter.

eventX=00/00/00 00:00:00 0000000000000000, 0000000000000000, 000

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 87 88

No comments

Alpha Technologies FXM2000 Specifications Page 42