17
017-230-B0 Rev 0810
CAUTION!
Torque the battery terminals according to the manufacturer’s specications as given on
the name plate or data sheet.
2. Wire the batteries as shown in Figure 8. If used, install the in-line fuse as shown.
3. Verify the battery connector polarity and the DC voltage with a DC voltmeter. If correct, attach it to the
Alpha FXM’s external battery connector. Otherwise, perform troubleshooting before connecting it to the
Alpha FXM.
4. Route the sensor end of the battery temperature cable to the batteries. Tape it to the side of battery as shown
in Figure 8.
5. If multiple battery strings are used, repeat steps 1 to 4 as required.
Comments to this Manuals