Alpha Technologies FXM2000 Specifications download pdf (Page 32)

017-230-B0 Rev 0810

6.7.1 Wiring the RS-232 port

The Alpha FXM’s front panel has a DE-9 female connector. When connected to a PC with Windows HyperTer-

minal or other terminal emulation software, the Alpha FXM can be remotely monitored and controlled with it’s

command-line system. The Alpha UPS Monitor provides a Windows or web browser type of control.

Procedure

1. Connect a 9-pin, fully shielded, straight-through DE-9 to DE-9 connector cable between the computer’s port

and the Alpha FXM’s port.

2. Conﬁgure the communications parameters to the values shown in the terminal set up table below.

Figure 12 — RS-232 pin connections

Table F — Terminal Set Up Table

Emulation Type

VT 100 or

Compatible

Backspace N/A

Duplex Mode Half Duplex Break Length N/A

Xon/Xoff Flow Control None Emulation Type N/A

RTS/CTS Flow Control Off Communication Parameters

Line Wrap On Handshaking Software Handshaking

Screen Scroll On Baud Rate 2400 bps

CR Translation CR Data Format 8-bit Data, No Parity, 1 Stop Bit, No Flow Control.

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 87 88

No comments

Alpha Technologies FXM2000 Specifications Page 32